Huna Next Generation Roller Blinds

Inside Recess Fit:

If you want your blind fitted inside your window recess, please measure the window recess width and height and ensure the blind can move freely without obstacles.

Take your measurements

To determine the right blind size start by measuring your window recess dimensions. Measure the recess height and width at the top. Note down the width and height of your window recess in centimeters (you can enter a decimal point for a more precise dimension - i.e. 100.5 cm).  To ensure the blind profile fits inside the recess we will deduct 10mm from the width of the blind.

Outside Recess Fit:

If you plan to fit your blind fitted outside your window recess, please measure the window recess width and height and determine how much the blind will overlap the window recess.

Take your measurements

To determine the right blind size start by measuring your window recess dimensions. Measure the recess height from the highest point the blind will be mounted to where the fabric will lower to. Measure the recess width and add on the desired amount you would like the fabric to overlap the recess edge. Please not that the pelmet is 3.9 cm wider than the fabric so when entering a width account for the desired fabric overlap + 3.9cm (i.e. if 5cm fabric overlap is required then blind width = recess width + 10cm (5cm each each side) + 3.9cm).

The fabric width will be 2.4 cm smaller than the pelmet width. I.e. if your blind measures 91.5 cm then the fabric size will be 89.1 cm, leaving a 1.2 cm gap between the pelmet and the fabric at both sides of the blind (2.4cm overall).

ABOUT HUNA BLIND SIZES

Minimum
- WIDTH : 905mm
- HEIGHT : 250mm

Maximum
- WIDTH : 2500mm
- HEIGHT: 2500mm