Fully Customisable Issac Sand Electric Roller Blind
Sorry, size W x H cm isn't available in Fully Customisable Issac Sand Electric Roller Blind
Below are min & max sizes available in this fabric/blind range. Edit Size
| Width (cm) | |
| Height (cm) | 65 - 250 cm |
| 30 - 250 cm |
Shop available fabrics/blind ranges in this size:
Unable to find blinds in your sizes? Ask for a bespoke electric blinds quote
IMPORTANT. Each blind range is powered by a specially selected Somfy motor, and has it’s own exclusive finishings such as pelmet options. To achieve consistent open/close speeds and a fully co-ordinated look, choose blinds from the same range for each room.
Help with measuring your roller blinds
Before recording your measurements, please follow these simple steps to ensure your powered blind is an exact fit:
- Use a metal tape measure for accurate measurements.
- Make sure you have a pen and paper ready to record your measurements in centimeters (see below to
download our measurement templates). - Take into account any obstructions such as window handles or tiles, etc.
- If your recess is partly tiled – measure the top of the recess and again between the tiles, then compare the two measurements. If the difference between them is less than 18mm – use the measurement at the top of the recess. If it is more than 18mm either use the measurement between the tiles, or reduce top of the recess measurement accordingly for a closer fit.
Important note when measuring for your powered roller blind
We have to allow for the brackets and motor head at either end of the blind, so please be aware that the fabric width is approximately 3.6cm less than the overall recorded measurement.
Cassette Systems - INSIDE RECESS FIT ONLY
We will deduct 10mm from your width measurement when ordering a cassette system to be fitted inside the window recess. This is to ensure the cassette profile fits comfortably within the window recess area (there will be a 5mm gap at either side of the cassette profile when fitted).
Inside Recess FitTake three measurements across the width and height of the recess and use the shortest measurements recorded when ordering your powered blind.
|
Outside Recess FitBefore taking your measurements, you must decide on how much fabric overlap you would like over the window recess. Take this into account when recording your measurements along with the 3.6cm allowance across the width for the brackets and motor head.
|
Help with measuring your roller blinds
Before recording your measurements, please follow these simple steps to ensure your powered blind is an exact fit:
- Use a metal tape measure for accurate measurements.
- Make sure you have a pen and paper ready to record your measurements in centimeters (see below to
download our measurement templates). - Take into account any obstructions such as window handles or tiles, etc.
- If your recess is partly tiled – measure the top of the recess and again between the tiles, then compare the two measurements. If the difference between them is less than 18mm – use the measurement at the top of the recess. If it is more than 18mm either use the measurement between the tiles, or reduce top of the recess measurement accordingly for a closer fit.
Important note when measuring for your powered roller blind
We have to allow for the brackets and motor head at either end of the blind, so please be aware that the fabric width is approximately 3.6cm less than the overall recorded measurement.
Cassette Systems - INSIDE RECESS FIT ONLY
We will deduct 10mm from your width measurement when ordering a cassette system to be fitted inside the window recess. This is to ensure the cassette profile fits comfortably within the window recess area (there will be a 5mm gap at either side of the cassette profile when fitted).
Inside Recess FitTake three measurements across the width and height of the recess and use the shortest measurements recorded when ordering your powered blind. |
Outside Recess FitBefore taking your measurements, you must decide on how much fabric overlap you would like over the window recess. Take this into account when recording your measurements along with the 3.6cm allowance across the width for the brackets and motor head. |
Somfy Powered Electric Roller Blind - Issac Sand
A neutral textured roller blind to add an uncomplicated and modern look to your window and blackout the light. Our Issac range is available in six colours to match all interior decors.
The blind is supplied as standard with a Somfy motor and a choice of control options.
About this blind fabric
- Blackout
- Wipe clean
Colours reproduced on screen may vary from the actual colours due to the limitations of the printing process. Great care has been taken to ensure that the fabric swatches and the information supplied are correct, however customers are advised to check the suitability of materials before use.
Range Details
Fully customisable electric blinds – available in over 100 plain and patterned fabrics with two cassette options. The blind is powered by a Somfy motor with embedded rechargeable battery and can be paired to any of our control options including wall switches, handsets and timers.
Blind specification:
- Maximum width: 250 cm
- Maximum height: 250 cm
- Fabric: 100% polyester
- Light filtering: this fabric is blackout rated
- Flame retardant: No
- Wipeclean: Yes
- Antibacterial: No
- Somfy WireFree Rollup 28 RTS Li-ion embedded motor
- Integral radio receiver with secure and reliable Somfy RTS radio protocol.
- The motor is equipped with an embedded rechargeable Li-ion battery.
- There is a 25 cm supply cable fitted to the motor head to connect to the charger.
- No remote (you may already have a Somfy remote at home).
- Somfy Smoove Origin RTS battery powered wall mounted switch.
- Somfy Telis 1 RTS Pure single channel remote control.
- Somfy Telis 4 RTS Pure multi (five) channel remote control.
- Somfy Telis 6 Chronis RTS Pure – multi (six) channel remote control with automatic timer and LCD screen.
- Charger for Rollup 28 RTS Li-ion embedded motor: The charger plugs into a standard mains socket and connects to the Somfy Rollup 28 RTS Li-ion embedded motor to charge up (the charger has a 3M long supply cable).
- Front Roll configuration: Your blind is configured with rear roll as a standard (nearest the glass). Select this option for front roll configuration (nearest the room).
- Connexoon RTS Window: Control hub for Somfy RTS powered blinds.
- Somfy TaHoma: Centralise control of your home's automated features. Compatible with expert partners and more than a hundred different Somfy products
Motor specification:
Control specification:
You can choose from the following control options:
Optional extra’s:
You can choose from the following optional extra’s:
Help guides
*Due to supply chain difficulties as a result of the Covid 19 measures being taken, we have reviewed our product range and can offer a smaller range of roller blind fabrics with a lead time of 2 weeks from order. Our roller blind production facility has now re-opened and we are taking all necessary measures to ensure manufacturing is fulfilled in line with the appropriate guidance. Somfy accessories are also available to order from our controls & accessories section, but with an increased lead time of 10 days. If there are any further changes or updates we will continue to update the information posted here. Thank you for your understanding at this time.*
In the box
- Powered roller blind fabricated to your specification complete with a Somfy motor fitted within the roller assembly.
- Standard roller system: supplied as a standard roller assembly with universal top/face fix brackets.
- Cassette system: supplied in a white or anthracite grey cassette profile. Supplied with either top or face fix spring brackets depending on the fit type selected during the order process.
- Power supply – the motor has an embedded li-ion rechargeable battery.
- The control selected (if applicable) during the order process.
- Instructions to guide you through the blind installation process from start to finish.