Configure your blinds
Help with measuring for roller blinds
Before recording your measurements, please follow these simple steps to ensure your powered blind is an exact fit:1. Use a metal tape measure for accurate measurements. 2. Make sure you have a pen and paper ready to record your measurements in centimeters (see below to download our measurement templates). 3. Take into account any obstructions such as window handles or tiles, etc.
Important note when measuring for your powered roller blind: We have to allow for the brackets and motor head at either end of the blind, so please be aware that the fabric width is approximately 3.6cm less than the overall recorded measurement. Open & Closed Cassette Systems - INSIDE RECESS FIT ONLY We will deduct 10mm from your width measurement when ordering a cassette system to be fitted inside the window recess. This is to ensure the cassette profile fits comfortably within the window recess area (there will be a 5mm gap at either side of the cassette profile when fitted).
Inside Recess FitTake three measurements across the width and height of the recess and use the shortest measurements recorded when ordering your powered blind. |
Outside Recess FitBefore taking your measurements, you must decide on how much fabric overlap you would like over the window recess. Take this into account when recording your measurements along with the 3.6cm allowance across the width for the brackets and motor head.
|
Help with measuring for roller blinds
Before recording your measurements, please follow these simple steps to ensure your powered blind is an exact fit:1. Use a metal tape measure for accurate measurements. 2. Make sure you have a pen and paper ready to record your measurements in centimeters (see below to download our measurement templates). 3. Take into account any obstructions such as window handles or tiles, etc.
Important note when measuring for your powered roller blind: We have to allow for the brackets and motor head at either end of the blind, so please be aware that the fabric width is approximately 3.6cm less than the overall recorded measurement. Open & Closed Cassette Systems - INSIDE RECESS FIT ONLY We will deduct 10mm from your width measurement when ordering a cassette system to be fitted inside the window recess. This is to ensure the cassette profile fits comfortably within the window recess area (there will be a 5mm gap at either side of the cassette profile when fitted).
Inside Recess FitTake three measurements across the width and height of the recess and use the shortest measurements recorded when ordering your powered blind. |
Outside Recess FitBefore taking your measurements, you must decide on how much fabric overlap you would like over the window recess. Take this into account when recording your measurements along with the 3.6cm allowance across the width for the brackets and motor head.
|
