Serene Sento Duckegg Electric Roller Blind
Sorry, size W x H cm isn't available in Serene Sento Duckegg Electric Roller Blind
Below are min & max sizes available in this fabric/blind range. Edit Size
| Width (cm) | |
| Height (cm) | 65 - 250 cm |
| 30 - 250 cm |
Shop available fabrics/blind ranges in this size:
Unable to find blinds in your sizes? Ask for a bespoke electric blinds quote
IMPORTANT. Each blind range is powered by a specially selected Somfy motor, and has it’s own exclusive finishings such as pelmet options. To achieve consistent open/close speeds and a fully co-ordinated look, choose blinds from the same range for each room.
Help with measuring Serene roller blinds
Before recording your measurements, please follow these simple steps to ensure your powered blind is an exact fit:
1. Use a metal tape measure for accurate measurements.
2. Make sure you have a pen and paper ready to record your measurements in centimeters (see below to
download our measurement templates).
3. Take into account any obstructions such as window handles or tiles, etc.
4. If your recess is partly tiled – measure the top of the recess and again between the tiles, then compare the two measurements. If the difference between them is less than 18mm – use the measurement at the top of the recess. If it is more than 18mm either use the measurement between the tiles, or reduce top of the recess measurement accordingly for a closer fit.
Important note when measuring for your powered roller blind:
We have to allow for the brackets and motor head at either end of the blind, so please be aware that the fabric width is approximately:
3.6cm less than the overall recorded measurement for standard roller blinds
3.9cm less than the overall recorded measurement for cassette roller blinds
Cassette Systems + RECESS FIT
When ordering a cassette system and selecting 'Recess Fit', we will deduct 10mm from your width measurement. This is to ensure the cassette profile fits comfortably within the window recess area (there will be a 5mm gap at either side of the cassette profile when fitted). The cassette system will be supplied with either top or face fix spring brackets depending on the fit type selected during the order process.
Cassette Systems + EXACT FIT
When ordering a cassette system and selecting 'Exact Fit', we supply the cassette at the exact width measurement you order. When fitting the blind outside the window recess, take into consideration the amount of fabric you would like to overlap the recess edge – we recommend 50mm at each side to help with light filtering at the sides of your window.
Help with measuring
Recess FitTake three measurements across the width and
|
Exact FitBefore taking your measurements, take into consideration the amount of fabric you would like to overlap the recess edge. Take this into account when recording your measurements and remember to factor in the fabric gap at both sides of the blind (view blind dimensions document here).
|
Help with measuring Serene roller blinds
Before recording your measurements, please follow these simple steps to ensure your powered blind is an exact fit:
1. Use a metal tape measure for accurate measurements.
2. Make sure you have a pen and paper ready to record your measurements in centimeters (see below to
download our measurement templates).
3. Take into account any obstructions such as window handles or tiles, etc.
4. If your recess is partly tiled – measure the top of the recess and again between the tiles, then compare the two measurements. If the difference between them is less than 18mm – use the measurement at the top of the recess. If it is more than 18mm either use the measurement between the tiles, or reduce top of the recess measurement accordingly for a closer fit.
Important note when measuring for your powered roller blind:
We have to allow for the brackets and motor head at either end of the blind, so please be aware that the fabric width is approximately:
3.6cm less than the overall recorded measurement for standard roller blinds
3.9cm less than the overall recorded measurement for cassette roller blinds
Cassette Systems + RECESS FIT
When ordering a cassette system and selecting 'Recess Fit', we will deduct 10mm from your width measurement. This is to ensure the cassette profile fits comfortably within the window recess area (there will be a 5mm gap at either side of the cassette profile when fitted). The cassette system will be supplied with either top or face fix spring brackets depending on the fit type selected during the order process.
Cassette Systems + EXACT FIT
When ordering a cassette system and selecting 'Exact Fit', we supply the cassette at the exact width measurement you order. When fitting the blind outside the window recess, take into consideration the amount of fabric you would like to overlap the recess edge – we recommend 50mm at each side to help with light filtering at the sides of your window.
Help with measuring
Recess FitTake three measurements across the width and |
Exact FitBefore taking your measurements, take into consideration the amount of fabric you would like to overlap the recess edge. Take this into account when recording your measurements and remember to factor in the fabric gap at both sides of the blind (view blind dimensions document here). |
Serene Electric Roller Blind - Sento Duckegg
Our Sento blackout fabric range features a subtle textured panel of interweaving strands of complementing colours available in 4 different finishes. This fabric has a white backing.
This is a blackout rated fabric with a light filtering factor rating of: 5
Light filtering values: 1 = high light level penetration - 5 = light block.
This blind is fitted with a Somfy Sonesse 28 RTS quiet drive motor.
About this blind fabric
- Blackout
- Antibacterial
Colours reproduced on screen may vary from the actual colours due to the limitations of the printing process. Great care has been taken to ensure that the fabric swatches and the information supplied are correct, however customers are advised to check the suitability of materials before use.
Range Details
Serene electric roller blinds available in over 100 plain and patterned fabrics with three cassette options. The blind is powered by a Somfy Sonesse 28 RTS quiet motor with a choice of power supply options and can be paired to any of our control options including wall switches, handsets and timers.
Blind specification:
- Maximum width: 300 cm
- Maximum height: 290 cm
- Fabric: 100% polyester
- Light filtering: this fabric is blackout rated
- Flame retardant: No
- Wipeclean: No
- Antibacterial: Yes
Motor specification:
- Somfy Sonesse 28 RTS Li-ion if the embedded battery power option is selected
- Somfy Sonesse 28 RTS if the external battery or mains adapter power option is selected
- Integral radio receiver with secure and reliable Somfy RTS radio protocol.
Control specification:
You can choose from the following control options:
- No remote (you may already have a Somfy RTS remote).
- Somfy Situo RTS single channel remote control.
- Somfy Situo 1 RTS Pure single channel remote control.
- Somfy Situo 5 RTS Pure multi (five) channel remote control.
- Somfy Smoove Origin RTS battery powered wall mounted switch.
- Somfy Smoove Origin 4 RTS multi channel wall mounted switch.
- Somfy Telis 6 Chronis RTS Pure – multi (six) channel remote control with automatic timer and LCD screen.
Optional extra’s:
You can choose from the following optional extra’s:
- V2 charger for Somfy RTS Li-ion embedded motor: The charger plugs into a standard mains socket and connects to the Somfy RTS Li-ion embedded motor to charge up (the charger has a 1.9M long supply cable).
- Front Roll configuration: Your blind is configured with rear roll as a standard (nearest the glass). Select the front roll option in the 'Optional Extras' step of the configurator .
- Somfy TaHoma: Centralise control of your home's automated features. Compatible with expert partners and more than a hundred different Somfy products
Help guides
In the box
- Powered roller blind fabricated to your specification complete with your choice of Somfy Sonesse 28 RTS quiet drive motor fitted within the roller assembly.
- Standard roller system: supplied as a standard roller assembly with universal top/face fix brackets.
- Cassette system: supplied in a white, anthracite grey or black cassette profile. Supplied with either top or face fix spring brackets depending on the fit type selected during the order process.
- Power supply – supplied with the relevant Sonesse 28 RTS motor model depending on the power supply option selected. Li-ion rechargeable battery options will provide 9-12 months of average use on 100cm high blind, 6-9 months on a 200cm high blind. A plug in mains adapter is supplied when mains power is selcted as the power supply option.
- The control selected (if applicable) during the order process.
- Battery chargers ARE NOT supplied as standard and must be purchased separately (a charger can be added in the ‘optional extra’ step when configuring your blind).
- Instructions to guide you through the blind installation process from start to finish.