My Cart

*Covid-19 – Roller Blinds Still Available – Limited Fabrics – Delivery in 3 Weeks – Click Here* — Read more about our Covid-19 policy
Call us: 0800 014 6123
  • Search
  • Help & Advice

    Help & advice

    We hope our Help & Advice section will give you all the information you need to help you buy your motorised blinds.

    View help & advice

    Why motorised blinds?


    Remote controlled blinds are much more than an affordable luxury; they can really enhance your life.

    Read more

    Measuring up


    Our guide shows you how to measure up accurately to ensure your blinds fit perfectly into place.

    View guide

    How to install


    Our motorised blinds are as easy to install as normal roller blinds, so you can fit them yourself.

    View installation video

  • Your cart is empty.
    View Cart Checkout
Search

Simplicity Calm Noir Electric Roller Blind

View your complete list of blinds

£119.00 as configured

Customize Simplicity Calm Noir Electric Roller Blind
How to measure

Save 10% in August

discount applied in cart - offer ends 31st August

Enter required size

Enter

Help with measuring your roller blinds

Before recording your measurements, please follow these simple steps to ensure your powered blind is an exact fit:

  1. Use a metal tape measure for accurate measurements.
  2. Make sure you have a pen and paper ready to record your measurements in centimeters (see below to
    download our measurement templates).
  3. Take into account any obstructions such as window handles or tiles, etc.
  4. If your recess is partly tiled – measure the top of the recess and again between the tiles, then compare the two measurements. If the difference between them is less than 18mm – use the measurement at the top of the recess. If it is more than 18mm either use the measurement between the tiles, or reduce top of the recess measurement accordingly for a closer fit.

Important note when measuring for your powered roller blind

We have to allow for the brackets and motor head at either end of the blind, so please be aware that the fabric width is approximately 3.6cm less than the overall recorded measurement.

Cassette Systems - INSIDE RECESS FIT ONLY

We will deduct 10mm from your width measurement when ordering a cassette system to be fitted inside the window recess. This is to ensure the cassette profile fits comfortably within the window recess area (there will be a 5mm gap at either side of the cassette profile when fitted).

 

Inside Recess Fit

Take three measurements across the width and height of the recess and use the shortest measurements recorded when ordering your powered blind.

 

 

 

View PDF

Outside Recess Fit

Before taking your measurements, you must decide on how much fabric overlap you would like over the  window  recess. Take this into account when recording  your  measurements along with the 3.6cm allowance across the width for the brackets and motor head.

 

 View PDF

Configure options

Select Fit Type *

Fit Type

Select this option for your roller blind to be fitted inside the window recess and top fixed to the upper section of the recess.

Select this option for your roller blind to be fitted inside the window recess and face (i.e. on the window frame).

Select this option for your roller blind to be fitted outside the window recess and top mounted to the ceiling.

Select this option for your roller blind to be fitted outside the window recess and face fixed to the wall.

Help with mounting your Simplicity roller blinds

We offer 4 options for mounting your electric roller blind:

  • Fit Inside Recess + Top mount
  • Fit Inside Recess + Face Mount
  • Fit Outside Recess + Top Mount
  • Fit Outside Recess + Face Mount

Our standard roller blind system is supplied with universal white top/face fix brackets.
The fabric width is 35mm narrower than the overall bracket to bracket width to allow for the motor and blind components. The width size you order will be made as the bracket to bracket width (not fabric width).
When installing your blind outside the window recess, take into consideration the amount of fabric you would like to overlap the recess edge – we recommend 50mm at each side to help with light filtering at the sides of your window.
Help with measuring

Inside Recess Fit

Take three measurements across the width and
height of the recess and use the shortest measurements recorded when ordering your
powered blind.
 
 

View PDF

Outside Recess Fit

Before taking your measurements, take into consideration the amount of fabric you would like to overlap the recess edge. Take this into account when recording your measurements and remember to factor in the fabric gap at both sides of the blind (view blind dimensions document here).

 View PDF
Select Fabric Roll *

Fabric Roll

This system is supplied as a standard roller blind assembly with the Somfy motor positioned on the right hand side. White brackets and fixings are supplied with the blind system.

Select this option for back roll configuration (nearest the glass).

Usually your blind is configured with back roll as a standard (nearest the glass). Because the fabric sits closer to the window, back rolling is best for light and heat control.

This system is supplied as a standard roller blind assembly with the Somfy motor positioned on the right hand side. White brackets and fixings are supplied with the blind system.

Select this option for front roll configuration (nearest the room).

Front rolling will hide the tube at the top of your window. So when your blind is open, you'll have fabric and the bottom rail on display. If your window has a recess, and you plan on inside mounting your blind, front rolling will assist in clearing any obstructions such as handles, keys and locks.

When mounting outside the window, front rolling will give you larger gaps and may let some light through on the sides of your window.

Select Bottom bar or fabric hem *

Bottom bar or fabric hem

Select this option to add a fabric hem to your configuration.

Your blind will be produced with a 1 inch (2.5cm) wide blind hem.

Select this option for a white bottom bar.

Select this option for a anthracite grey bottom bar.

Bottom Bar Options

Fabric Wrapped Hem Bar
The fabric you have selected is wrapped around a load bar and provides a matching finish.

White Bottom Bar
A stylish aluminium bottom bar finished in white to match the white cassette finish.

Anthracite Grey Bottom Bar
A stylish aluminium bottom bar finished in anthracite grey to match the anthracite grey cassette finish.

Select Optional extra

Optional extra

The charger plugs into a standard mains socket and connects to a Somfy Rollup 28 RTS Li-ion embedded motor to charge up (Supply cable length: 193cm) - a single charger can be used with multiple blinds, but only one motor can be charged at a time.

To extend your cable connection from the charger to the motor supply cable you can add this 240cm extension cable.

*Each blind is supplied with a 1x single channel remote control. But you can optionally add additional controls*

Single channel remote control handset in white with grey trim. Ideal for controlling an individual powered blind.

  • Battery powered (no wiring required).
  • Supplied with a mounting pin (for wall mount option).
  • Raise, lower and stop functions (open, close, stop).

*Each blind is supplied with a 1x single channel remote control. But you can optionally add additional controls*

Multi channel remote control handset in white with grey trim. Ideal for controlling multiple powered blinds individually and as a group.

  • Battery powered (no wiring required).
  • Supplied with a mounting pin (for wall mount option).
  • Raise, lower and stop functions (open, close, stop).
  • Channel selector button (5 channels).

*Each blind is supplied with a 1x single channel remote control. But you can optionally add additional controls*

Single channel wall switch in white. Ideal for controlling an individual powered blind.

  • Battery powered (no wiring required).
  • Supplied with a wall mounting plate.
  • Raise, lower and stop functions (open, close, stop).

Multi channel wall switch in white. Ideal for controlling multiple powered blinds individually and as a group.

  • Battery powered (no wiring required).
  • Supplied with a wall mounting plate.
  • Raise, lower and stop functions (open, close, stop).
  • Channel selector buttons.

Control hub for Somfy RTS powered blinds. Connexoon Window RTS enables you to centralise, control and program RTS connected interior blinds, curtains and lighting – when connected to your internet router.

Note: Standard Somfy control is still required to carry out blind programming.

Somfy's TaHoma allows you to centralise control of your home's automated features. Compatible with expert partners including Amazon Alexa, Philips Hue & Sonos and over 100 Somfy RTS & io homecontrol products. Open your blinds, switch on your lighting or operate your garage doors all from your PC, or using the TaHoma app on your smartphone.

Compatible with:Somfy TaHoma compatible

 

Order a TaHoma today & get a FREE Amazon Echo Dot *(worth £49 - offer valid whist stocks last)

Note: Standard Somfy control is still required to carry out blind programming.

£119.00 as configured

Free delivery within 2 weeks

Review your configuration

Simplicity Calm Noir Electric Roller Blind

Simplicity Calm Noir Electric Roller Blind

£119.00 as configured

Sorry, size W x H cm isn't available in Simplicity Calm Noir Electric Roller Blind

Below are min & max sizes available in this fabric/blind range. Edit Size

  Width (cm)
Height (cm) 65 - 200 cm
30 - 240 cm

Shop available fabrics/blind ranges in this size:

Unable to find blinds in your sizes? Ask for a bespoke electric blinds quote

IMPORTANT. Each blind range is powered by a specially selected Somfy motor, and has it’s own exclusive finishings such as pelmet options. To achieve consistent open/close speeds and a fully co-ordinated look, choose blinds from the same range for each room.

Enter your blind sizes

Add a blind Done

Help with measuring your roller blinds

Before recording your measurements, please follow these simple steps to ensure your powered blind is an exact fit:

  1. Use a metal tape measure for accurate measurements.
  2. Make sure you have a pen and paper ready to record your measurements in centimeters (see below to
    download our measurement templates).
  3. Take into account any obstructions such as window handles or tiles, etc.
  4. If your recess is partly tiled – measure the top of the recess and again between the tiles, then compare the two measurements. If the difference between them is less than 18mm – use the measurement at the top of the recess. If it is more than 18mm either use the measurement between the tiles, or reduce top of the recess measurement accordingly for a closer fit.

Important note when measuring for your powered roller blind

We have to allow for the brackets and motor head at either end of the blind, so please be aware that the fabric width is approximately 3.6cm less than the overall recorded measurement.

Cassette Systems - INSIDE RECESS FIT ONLY

We will deduct 10mm from your width measurement when ordering a cassette system to be fitted inside the window recess. This is to ensure the cassette profile fits comfortably within the window recess area (there will be a 5mm gap at either side of the cassette profile when fitted).

 

Inside Recess Fit

Take three measurements across the width and height of the recess and use the shortest measurements recorded when ordering your powered blind.

 

 

 

View PDF

Outside Recess Fit

Before taking your measurements, you must decide on how much fabric overlap you would like over the  window  recess. Take this into account when recording  your  measurements along with the 3.6cm allowance across the width for the brackets and motor head.

 

 View PDF

Help with measuring your roller blinds

Before recording your measurements, please follow these simple steps to ensure your powered blind is an exact fit:

  1. Use a metal tape measure for accurate measurements.
  2. Make sure you have a pen and paper ready to record your measurements in centimeters (see below to
    download our measurement templates).
  3. Take into account any obstructions such as window handles or tiles, etc.
  4. If your recess is partly tiled – measure the top of the recess and again between the tiles, then compare the two measurements. If the difference between them is less than 18mm – use the measurement at the top of the recess. If it is more than 18mm either use the measurement between the tiles, or reduce top of the recess measurement accordingly for a closer fit.

Important note when measuring for your powered roller blind
We have to allow for the brackets and motor head at either end of the blind, so please be aware that the fabric width is approximately 3.6cm less than the overall recorded measurement.
Cassette Systems - INSIDE RECESS FIT ONLY
We will deduct 10mm from your width measurement when ordering a cassette system to be fitted inside the window recess. This is to ensure the cassette profile fits comfortably within the window recess area (there will be a 5mm gap at either side of the cassette profile when fitted).
 

Inside Recess Fit

Take three measurements across the width and height of the recess and use the shortest measurements recorded when ordering your powered blind.
 
 
 

View PDF

Outside Recess Fit

Before taking your measurements, you must decide on how much fabric overlap you would like over the  window  recess. Take this into account when recording  your  measurements along with the 3.6cm allowance across the width for the brackets and motor head.
 

 View PDF
SAVE 10%
main product photo
Free swatch
Order free swatch

Somfy Powered Electric Roller Blind - Calm Noir

A warm plain dimout roller blind to add an uncomplicated and modern look to your window and filter the light. Our Calm range is available in 47 colours to match all interior decors. 

The blind is supplied as standard with a Somfy Rollup 28 li-ion motor (positioned at right side) and a Somfy Situo single channel control is included.

About this blind fabric

  • Dimout

Colours reproduced on screen may vary from the actual colours due to the limitations of the printing process. Great care has been taken to ensure that the fabric swatches and the information supplied are correct, however customers are advised to check the suitability of materials before use.

Range Details

Simplicity all-in-one electric blinds – available in over 90 plain dimout and blackout fabrics with three bottom bar options. The blind is powered by a Somfy motor with embedded rechargeable battery and can be paired to any of our control options including wall switches, handsets and timers. The Somfy motor powering the blind is also compatible with the Tahoma and Connexoon Hubs allowing control via smart phone apps and voice control devices.

The fabric width is 35mm narrower than the overall bracket to bracket width to allow for the motor and blind components. The width size you order will be made as the bracket to bracket width (not fabric width).

Show specification

Blind specification:

    • Maximum width: 200 cm
    • Maximum height: 240 cm
    • Fabric: 100% polyester
    • Light filtering: this fabric is dimout rated
    • Flame retardant: No
    • Wipeclean: No
    • Antibacterial: No

    Motor specification:

    • Somfy WireFree Rollup 28 RTS Li-ion embedded motor
    • Integral radio receiver with secure and reliable Somfy RTS radio protocol.
    • The motor is equipped with an embedded rechargeable Li-ion battery.
    • There is a 25 cm supply cable fitted to the motor head to connect to the charger.
    • Battery performance from full charge offers 11 months of operation based on 1 x Up/Down cycle per day (100cm high blind) 8 months of operation (200cm high blind).

    Control specification:

    • Somfy Situo - one-channel control is included.

    Optional extra’s:

    You can choose from the following optional extra’s:

    • Charger for Rollup 28 RTS Li-ion embedded motor
    • Somfy Situo 1 RTS Pure single channel remote control.
    • Somfy Situo 5 RTS Pure multi (five) channel remote control.
    • Somfy Smoove Origin RTS battery powered wall mounted switch.
    • Somfy Smoove Origin 4 RTS multi channel wall mounted switch.
    • Connexoon RTS Window: Control hub for Somfy RTS powered blinds.
    • Somfy TaHoma: Centralise control of your home's automated features. Compatible with expert partners and more than a hundred different Somfy products
    Compatible with Somfy Tahoma and Connexoon control hubs for App and voice activation control

Help guides

Roller Blind Dimensions
Roller blind installation and programming guide
Measurement template for inside window recess fitting
Measurement template for outside window recess fitting

In the box

  • The blind is supplied as standard with the Somfy motor positioned on the right hand side. White brackets and fixings are supplied with the blind system.
  • Each blind is supplied with a 1x single channel remote control.
  • The Somfy motor incorporates an integral rechargeable li-ion battery. A full charge will provide 11 months of average use on 100cm high blind, 8 months on a 200cm high blind.
  • Battery chargers are not supplied as standard and must be purchased separately.
  • The optional controls or accessories selected (if applicable) during the order process.
  • QR code label with a link to digital installation instructions – instructions can be found here.