My Cart

*Covid-19 – Roller Blinds Still Available – Limited Fabrics – Delivery in 3 Weeks – Click Here* — Read more about our Covid-19 policy
Call us: 0800 014 6123
  • Search
  • Help & Advice

    Help & advice

    We hope our Help & Advice section will give you all the information you need to help you buy your motorised blinds.

    View help & advice

    Why motorised blinds?


    Remote controlled blinds are much more than an affordable luxury; they can really enhance your life.

    Read more

    Measuring up


    Our guide shows you how to measure up accurately to ensure your blinds fit perfectly into place.

    View guide

    How to install


    Our motorised blinds are as easy to install as normal roller blinds, so you can fit them yourself.

    View installation video

  • Your cart is empty.
    View Cart Checkout
Search

Fully Customisable Storm Ash Roller Blind

View your complete list of blinds

£141.00 as configured

Customize Fully Customisable Storm Ash Roller Blind
How to measure

Save £50 on TaHoma or £25 on Connexoon

*Only valid with blind purchase, add from 'Optional Extras' - T&C's apply

Enter required size

Enter

Help with measuring your roller blinds

Before recording your measurements, please follow these simple steps to ensure your powered blind is an exact fit:

  1. Use a metal tape measure for accurate measurements.
  2. Make sure you have a pen and paper ready to record your measurements in centimeters (see below to
    download our measurement templates).
  3. Take into account any obstructions such as window handles or tiles, etc.
  4. If your recess is partly tiled – measure the top of the recess and again between the tiles, then compare the two measurements. If the difference between them is less than 18mm – use the measurement at the top of the recess. If it is more than 18mm either use the measurement between the tiles, or reduce top of the recess measurement accordingly for a closer fit.

Important note when measuring for your powered roller blind

We have to allow for the brackets and motor head at either end of the blind, so please be aware that the fabric width is approximately 3.6cm less than the overall recorded measurement.

Cassette Systems - INSIDE RECESS FIT ONLY

We will deduct 10mm from your width measurement when ordering a cassette system to be fitted inside the window recess. This is to ensure the cassette profile fits comfortably within the window recess area (there will be a 5mm gap at either side of the cassette profile when fitted).

 

Inside Recess Fit

Take three measurements across the width and height of the recess and use the shortest measurements recorded when ordering your powered blind.

 

 

 

View PDF

Outside Recess Fit

Before taking your measurements, you must decide on how much fabric overlap you would like over the  window  recess. Take this into account when recording  your  measurements along with the 3.6cm allowance across the width for the brackets and motor head.

 

 View PDF

Configure options

Select Fit Type *

Fit Type

Select this option for your roller blind to be fitted inside the window recess and top fixed to the upper section of the recess.

Select this option for your roller blind to be fitted inside the window recess and face (i.e. on the window frame).

Select this option for your roller blind to be fitted outside the window recess and top mounted to the ceiling.

Select this option for your roller blind to be fitted outside the window recess and face fixed to the wall.

Help with mounting your roller blinds

We offer 4 options for mounting your electric roller blind:

  • Fit Inside Recess + Top mount
  • Fit Inside Recess + Face Mount
  • Fit Outside Recess + Top Mount
  • Fit Outside Recess + Face Mount

Our standard roller blind system is supplied with universal top/face fix brackets.
Our cassette system is supplied with either top or face fix spring brackets depending on the fit type selected during the order process.
Cassette Systems + INSIDE RECESS FIT
When ordering a cassette system to be fitted inside the window recess we will deduct 10mm from your width measurement. This is to ensure the cassette profile fits comfortably within the window recess area (there will be a 5mm gap at either side of the cassette profile when fitted).
When installing your blind outside the window recess, take into consideration the amount of fabric you would like to overlap the recess edge – we recommend 50mm at each side to help with light filtering at the sides of your window.
Help with measuring

Inside Recess Fit

Take three measurements across the width and
height of the recess and use the shortest measurements recorded when ordering your
powered blind.
 
 

View PDF

Outside Recess Fit

Before taking your measurements, take into consideration the amount of fabric you would like to overlap the recess edge. Take this into account when recording your measurements and remember to factor in the fabric gap at both sides of the blind (view blind dimensions document here).

 View PDF
Select Blind system *

Blind system

This system is supplied as a standard roller blind assembly with a set of universal brackets securing the blind at each end.

The roller blind system dimensions are available in this PDF document.

This system consists of a cassette profile that completely encloses your blind's fabric roll. The cassette system has a fresh white design that seamlessly blends with a modern look.

We will deduct 10mm from your width measurement when ordering a cassette system to be fitted inside the window recess.

This is to ensure the cassette profile fits comfortably within the window recess area (there will be a 5mm gap at either side of the cassette profile when fitted).

The roller blind system dimensions are available in this PDF document.

NOTE: If you add a cassette, your blind will be delivered in 3 weeks instead of in 2 weeks.

This system consists of a cassette profile that completely encloses your blind's fabric roll. The cassette system has a anthrcite grey design that seamlessly blends with a industrial styled room.

We will deduct 10mm from your width measurement when ordering a cassette system to be fitted inside the window recess.

This is to ensure the cassette profile fits comfortably within the window recess area (there will be a 5mm gap at either side of the cassette profile when fitted).

The roller blind system dimensions are available in this PDF document.

NOTE: If you add a cassette, your blind will be delivered in 3 weeks instead of in 2 weeks.

Help with choosing a blind system for your roller blinds

Our roller blinds are available in three different versions:

  • Standard roller system
  • White Cassette
  • Anthracite Grey Cassette

The roller blind system dimensions are available in this PDF document. NOTE: If you add a cassette, your blind will be delivered in 3 weeks instead of in 2 weeks.

Standard

 

The standard system consists of an exposed roller assembly secured in place with universal top/face fix brackets.

Cassette (White or Anthracite Grey)

  
This system consists of a cassette profile with 70mm front pelmet to cover the fabric roll. The cassette system has a fresh design that seamlessly blends with any look. Supplied in a white or anthracite grey finish with either top or face fix spring brackets depending on the fit type selected during the order process.
We will deduct 10mm from your width measurement when ordering a cassette system to be fitted inside the window recess. This is to ensure the cassette profile fits comfortably within the window recess area (there will be a 5mm gap at either side of the cassette profile when fitted).

Select Bottom bar or fabric hem *

Bottom bar or fabric hem

Select this option to add a fabric hem to your configuration.

Your blind will be produced with a 1 inch (2.5cm) wide blind hem.

Select this option for a white bottom bar.

Select this option for a anthracite grey bottom bar.

Bottom Bar Options

Fabric Wrapped Hem Bar
The fabric you have selected is wrapped around a load bar and provides a matching finish.

White Bottom Bar
A stylish aluminium bottom bar finished in white to match the white cassette finish.

Anthracite Grey Bottom Bar
A stylish aluminium bottom bar finished in anthracite grey to match the anthracite grey cassette finish.

Select Motor position *

Motor position

Select this option for left side motor position

The motor has an embedded rechargeable battery which requires charging from time to time. The motor head has a 25cm cable, which the charger plugs into when battery charging is required. Take this into account when deciding the motor position (i.e. if there is a power point at the left or right side of the blind window, then select the relevant side for a convenient charging connection).

Select this option for right side motor position

The motor has an embedded rechargeable battery which requires charging from time to time. The motor head has a 25cm cable, which the charger plugs into when battery charging is required. Take this into account when deciding the motor position (i.e. if there is a power point at the left or right side of the blind window, then select the relevant side for a convenient charging connection).

Help with choosing a motor position for fully customisable roller blinds

The roller blind motor is equipped with an embedded rechargeable battery which requires charging from time to time. The motor head has a 25cm cable, which the charger plugs into when battery charging is required. Take this into account when deciding the motor position (i.e. if there is a power point at the left or right side of the blind window, then select the relevant side for a convenient charging connection).
The Charger for Rollup 28 RTS Li-ion embedded motor(available to add to your order from "optional extra's")  simply plugs into a standard mains socket and connects to the embedded motor to charge up (Supply cable length: 193cm).
To extend your cable connection from the charger to the motor supply cable you can add the 240cm extension cable.

Select Control *

Control

Single channel remote control handset in white with grey trim. Ideal for controlling an individual powered blind.

*A remote is required to adjust the stop positions of your blind & set a 'my' position*

  • Battery powered (no wiring required).
  • Supplied with a mounting pin (for wall mount option).
  • Raise, lower and stop functions (open, close, stop).

Multi channel remote control handset in white with grey trim. Ideal for controlling multiple powered blinds individually and as a group.

  • Battery powered (no wiring required).
  • Supplied with a mounting pin (for wall mount option).
  • Raise, lower and stop functions (open, close, stop).
  • Channel selector button (5 channels).

Single channel wall switch in white. Ideal for controlling an individual powered blind.

  • Battery powered (no wiring required).
  • Supplied with a wall mounting plate.
  • Raise, lower and stop functions (open, close, stop).

Multi channel wall switch in white. Ideal for controlling multiple powered blinds individually and as a group.

  • Battery powered (no wiring required).
  • Supplied with a wall mounting plate.
  • Raise, lower and stop functions (open, close, stop).
  • Channel selector buttons.

6 channel remote control handset with timer function in a white finish. Ideal for controlling multiple powered blinds individually and as a group with the addition of timer control.

  • 6 channel remote control with timer function.
  • Battery powered (no wiring required).
  • Supplied with a mounting bracket (for wall mount option).
  • Raise, lower and stop functions (open, close, stop).
  • LCD screen and channel selector buttons (6 channels).

    You may not want to select a remote control as an option during the order stage as:

    • You are ordering more than one blind and have already selected a remote control.
    • You may already own a Somfy RTS remote control that is compatible with the Somfy powered blind system.
    • You would rather select a control by browsing through the accessories section of the site.
    • You prefer using TaHoma or Connexoon. To establish a connection or to set the bottom, top and 'my' position, an RTS remote is necessary.

    Help choosing a remote for your fully customisable roller blinds

    No remote control

    You may not want to select a remote control as an option during the order stage as:

    - you are ordering more than one blind and have already selected a remote control.
    - you may already own a Somfy RTS remote control that is compatible with the Somfy powered blind system.
    - you would rather select a control by browsing through the accessories section of the site.
    Please note that without a control you can't operate the electric blind.
     Somfy Smoove Origin RTS Pure

    Wireless wall switch (Somfy Smoove Origin RTS Pure)

    Single channel wall switch in white. Ideal for controlling an individual powered blind.
    - Battery powered (no wiring required).
    - Supplied with a wall mounting plate.
    - Raise, lower and stop functions (open, close, stop).
     Somfy Smoove 4 RTS

    Multi channel wall switch (Somfy Smoove Origin 4 RTS)

    Multi channel wall switch in white. Ideal for controlling multiple powered blinds individually and as a group.
    - Battery powered (no wiring required).
    - Supplied with a wall mounting plate.
    - Raise, lower and stop functions (open, close, stop).
    - Channel selection buttons.
     Somfy Telis 1 RTS Pure

    One channel remote control (Somfy Telis 1 RTS Pure)

    Single channel remote control handset in white with grey trim. Ideal for controlling an individual powered blind.
    - Battery powered (no wiring required).
    - Raise, lower and stop functions (open, close, stop).
     Somfy Telis 4 RTS Pure

    Five channel remote control (Somfy Telis 4 RTS Pure)

    Multi channel remote control handset in white with grey trim. Ideal for controlling multiple powered blinds individually and as a group.
    - Battery powered (no wiring required).
    - Raise, lower and stop functions (open, close, stop).
    - Channel selector button (5 channels).
     Somfy Telis 6 RTS Pure with timer

    6-channel remote control with timer (Somfy Telis 6 Chronis RTS Pure)

    6 channel remote control handset with timer function in a white finish. Ideal for controlling multiple powered blinds individually and as a group with the addition of timer control.
    - Independent timer control per channel.
    - Battery powered (no wiring required).
    - Raise, lower and stop functions (open, close, stop).
    Select Optional extra

    Optional extra

    The charger simply plugs into a standard mains socket and connects to a Somfy Rollup 28 RTS Li-ion embedded motor to charge up (Supply cable length: 193cm) - if you are ordering multiple blinds you may only need 1 charger.

    To extend your cable connection from the charger to the motor supply cable you can add this 240cm extension cable.

    Your blind is configured with back roll as a standard (nearest the glass). Because the fabric sits closer to the window, back rolling is best for light and heat control.

    Select this option for front roll configuration (nearest the room).

    Front rolling will hide the tube at the top of your window. So when your blind is open, you'll have fabric and the bottom rail on display. If your window has a recess, and you plan on inside mounting your blind, front rolling will assist in clearing any obstructions such as handles, keys and locks.

    When mounting outside the window, front rolling will give you larger gaps and may let some light through on the sides of your window.

    SAVE £25 when you buy a blind in May

    Control hub for Somfy RTS powered blinds. Connexoon Window RTS enables you to centralise, control and program RTS connected interior blinds, curtains and lighting – when connected to your internet router.

    SAVE £50 when you buy a blind in May

    Somfy's TaHoma allows you to centralise control of your home's automated features. Compatible with expert partners including Amazon Alexa, Philips Hue & Sonos and over 100 Somfy RTS & io homecontrol products. Open your blinds, switch on your lighting or operate your garage doors all from your PC, or using the TaHoma app on your smartphone.

    Order a TaHoma today & get a FREE Amazon Echo Dot *(worth £49 - offer valid whist stocks last)

    Choosing your optional extra's

    Select one or more of the available optional extra's to complete your blinds configuration.
    Charger for Rollup 28 RTS Li-ion embedded motor

    • Charge for the embedded Li-ion battery
    • 193 cm supply cable
    • Optionally extend the supply cable with a 240cm extension cable

    Front Roll configuration (nearest the room)

    • Add front roll configuration to your blind
    • Helps clearing obstructions in case of inside recess mounting
    • In case of outside recess installation front roll has larger gaps
    • Front roll configuration gives less light and heat control

    Connexoon RTS Window
    Connexoon Window RTS enables you to centralise, control and program RTS connected interior blinds, curtains and lighting – when connected to your internet router.

    • Set up to 8 timer programs.
    • Set up to 4 scenarios ( i.e. leave home scenario: when you go to work, close certain blinds with a single command).
    • Suitable for use with iOS and Android Smartphones.
    • Control up to 30 Somfy RTS products.
    • Compatible with Philips Hue
    • NOTE: A Somfy RTS control is still required to pair blinds to the Connexoon during the set up procedure and make programming adjustments such as adjusting the blind upper and lower stop positions

    Somfy TaHoma + FREE Echo Dot
    The Somfy TaHoma is the easy to install automation system that makes controlling your home simple. With TaHoma you can open your blinds, switch off your lights or operate your garage doors all from your smartphone.

    • Intuitive interface and easy to program
    • Compatible with expert partners and over 100 Somfy RTS & io homecontrol products including Amazon Alexa, Philips Hue & Sonos
    • Suitable for use with iOS and Android Smartphones.
    • Control up to 200 devices total including 50 Somfy RTS products
    • Control multiple smart devices at once with scenario settings
    • For more information on how to connect TaHoma to Alexa Click Here

    £141.00 as configured

    Free delivery in 3 weeks

    Review your configuration

    Fully Customisable Storm Ash Roller Blind

    Fully Customisable Storm Ash Roller Blind

    £141.00 as configured

    Sorry, size W x H cm isn't available in Fully Customisable Storm Ash Roller Blind

    Below are min & max sizes available in this fabric/blind range. Edit Size

      Width (cm)
    Height (cm) 65 - 250 cm
    30 - 250 cm

    Shop available fabrics/blind ranges in this size:

    Unable to find blinds in your sizes? Ask for a bespoke electric blinds quote

    IMPORTANT. Each blind range is powered by a specially selected Somfy motor, and has it’s own exclusive finishings such as pelmet options. To achieve consistent open/close speeds and a fully co-ordinated look, choose blinds from the same range for each room.

    Enter your blind sizes

    Add a blind Done

    Help with measuring your roller blinds

    Before recording your measurements, please follow these simple steps to ensure your powered blind is an exact fit:

    1. Use a metal tape measure for accurate measurements.
    2. Make sure you have a pen and paper ready to record your measurements in centimeters (see below to
      download our measurement templates).
    3. Take into account any obstructions such as window handles or tiles, etc.
    4. If your recess is partly tiled – measure the top of the recess and again between the tiles, then compare the two measurements. If the difference between them is less than 18mm – use the measurement at the top of the recess. If it is more than 18mm either use the measurement between the tiles, or reduce top of the recess measurement accordingly for a closer fit.

    Important note when measuring for your powered roller blind

    We have to allow for the brackets and motor head at either end of the blind, so please be aware that the fabric width is approximately 3.6cm less than the overall recorded measurement.

    Cassette Systems - INSIDE RECESS FIT ONLY

    We will deduct 10mm from your width measurement when ordering a cassette system to be fitted inside the window recess. This is to ensure the cassette profile fits comfortably within the window recess area (there will be a 5mm gap at either side of the cassette profile when fitted).

     

    Inside Recess Fit

    Take three measurements across the width and height of the recess and use the shortest measurements recorded when ordering your powered blind.

     

     

     

    View PDF

    Outside Recess Fit

    Before taking your measurements, you must decide on how much fabric overlap you would like over the  window  recess. Take this into account when recording  your  measurements along with the 3.6cm allowance across the width for the brackets and motor head.

     

     View PDF

    Help with measuring your roller blinds

    Before recording your measurements, please follow these simple steps to ensure your powered blind is an exact fit:

    1. Use a metal tape measure for accurate measurements.
    2. Make sure you have a pen and paper ready to record your measurements in centimeters (see below to
      download our measurement templates).
    3. Take into account any obstructions such as window handles or tiles, etc.
    4. If your recess is partly tiled – measure the top of the recess and again between the tiles, then compare the two measurements. If the difference between them is less than 18mm – use the measurement at the top of the recess. If it is more than 18mm either use the measurement between the tiles, or reduce top of the recess measurement accordingly for a closer fit.

    Important note when measuring for your powered roller blind
    We have to allow for the brackets and motor head at either end of the blind, so please be aware that the fabric width is approximately 3.6cm less than the overall recorded measurement.
    Cassette Systems - INSIDE RECESS FIT ONLY
    We will deduct 10mm from your width measurement when ordering a cassette system to be fitted inside the window recess. This is to ensure the cassette profile fits comfortably within the window recess area (there will be a 5mm gap at either side of the cassette profile when fitted).
     

    Inside Recess Fit

    Take three measurements across the width and height of the recess and use the shortest measurements recorded when ordering your powered blind.
     
     
     

    View PDF

    Outside Recess Fit

    Before taking your measurements, you must decide on how much fabric overlap you would like over the  window  recess. Take this into account when recording  your  measurements along with the 3.6cm allowance across the width for the brackets and motor head.
     

     View PDF
    Smart Hub Offer
    main product photo
    Free swatch
    Order free swatch

    Somfy Powered Electric Roller Blind - Storm Ash

    A plain coloured roller blind to add an uncomplicated and modern look to your window and block out the light. Our Storm range is available in a wide range of colours to match all interior decors.  

    The blind is supplied as standard with a Somfy motor and a choice of control options.

    About this blind fabric

    • Blackout
    • Flame retardant
    • Antibacterial

    Colours reproduced on screen may vary from the actual colours due to the limitations of the printing process. Great care has been taken to ensure that the fabric swatches and the information supplied are correct, however customers are advised to check the suitability of materials before use.

    Range Details

    Fully customisable electric blinds – available in over 100 plain and patterned fabrics with two cassette options. The blind is powered by a Somfy motor with embedded rechargeable battery and can be paired to any of our control options including wall switches, handsets and timers.

    Show specification

    Blind specification:

    • Maximum width: 250 cm
    • Maximum height: 250 cm
    • Fabric: 100% polyester
    • Light filtering: this fabric is blackout rated
    • Flame retardant: No
    • Wipeclean: Yes
    • Antibacterial: Yes

    Motor specification:

    • Somfy WireFree Rollup 28 RTS Li-ion embedded motor
    • Integral radio receiver with secure and reliable Somfy RTS radio protocol.
    • The motor is equipped with an embedded rechargeable Li-ion battery.
    • There is a 25 cm supply cable fitted to the motor head to connect to the charger.

    Control specification:

    You can choose from the following control options:

    • No remote (you may already have a Somfy remote at home).
    • Somfy Smoove Origin RTS battery powered wall mounted switch.
    • Somfy Smoove Origin 4 RTS multi channel wall mounted switch.
    • Somfy Telis 1 RTS Pure single channel remote control.
    • Somfy Telis 4 RTS Pure multi (five) channel remote control.
    • Somfy Telis 6 Chronis RTS Pure – multi (six) channel remote control with automatic timer and LCD screen.

    Optional extra’s:

    You can choose from the following optional extra’s:

    • Charger for Rollup 28 RTS Li-ion embedded motor: The charger plugs into a standard mains socket and connects to the Somfy Rollup 28 RTS Li-ion embedded motor to charge up (the charger has a 3M long supply cable).
    • Front Roll configuration: Your blind is configured with rear roll as a standard (nearest the glass). Select this option for front roll configuration (nearest the room).
    • Connexoon RTS Window: Control hub for Somfy RTS powered blinds.
    • Somfy TaHoma: Centralise control of your home's automated features. Compatible with expert partners and more than a hundred different Somfy products

    Help guides

    Roller Blind Dimensions
    Roller blind installation and programming guide
    Measurement template for inside window recess fitting
    Measurement template for outside window recess fitting

    In the box

    • Powered roller blind fabricated to your specification complete with a Somfy motor fitted within the roller assembly.
    • Standard roller system: supplied as a standard roller assembly with universal top/face fix brackets.
    • Cassette system: supplied in a white or anthracite grey cassette profile. Supplied with either top or face fix spring brackets depending on the fit type selected during the order process.
    • Power supply – the motor has an embedded li-ion rechargeable battery.
    • The control selected (if applicable) during the order process.
    • Instructions to guide you through the blind installation process from start to finish.